Are your Leak Detection services available in Lexington?

Yes, Masters Plumbing Service provides round-the-clock Leak Detection services directly in Lexington, MN.

How much does emergency service cost in Lexington?

We offer upfront, transparent pricing with no hidden fees for all service calls in Lexington.

🎙️ Find It Before You Open a Wall

Stop Guessing Where the Leak Is — Leak Detection in Lexington, MN

Name: Masters Plumbing Service
Telephone: +1-844-833-0201
Price range: $$

A water bill that jumped 30% with no change in usage. A ceiling stain that keeps reappearing after painting. A soft spot in flooring with no visible source. These are signs of a hidden leak that's been running long enough to cause structural damage — and every day it runs is money lost and damage accumulating. Masters Plumbing Service uses acoustic ground microphones, thermal imaging cameras, and precision pressure decay testing to locate leaks in Lexington homes without speculative demolition.

📞 Find My Leak — Call +1-844-833-0201

Acoustic Ground MicrophonesThermal Infrared CamerasPressure Decay TestingSlab & Wall Leak Specialists

Our Detection Methods

01
Acoustic MicrophonePressurized leaks create a detectable sound — amplified to locate the failure within inches
02
Thermal Infrared CameraActive leaks create temperature differentials on surfaces — we map the wet zone without cutting
03
Pressure Decay TestingConfirms active water loss and zones the failing branch before detection equipment deploys
04
Tracer Gas DetectionFor very slow leaks where acoustic methods aren't conclusive — sensitive to parts per million
05
Written Report for InsuranceFormatted for insurance submission — pressure test results and thermal imagery included

Licensed Leak Detection service in Lexington, MN - Masters Plumbing Service

Why Detection First

4 Detection Capabilities We Bring to Every Leak Detection Call

No single detection method works for every leak scenario. Our techs are trained on four distinct approaches and select the right tool — or combination — based on pipe type, building construction, and leak characteristics.

🎙️

Acoustic Ground Microphone

Most effective on metal pipe under slab or in concrete — materials that conduct sound efficiently. We establish a clean acoustic baseline by briefly shutting off the house before scanning.

🌡️

Thermal Infrared Camera

Active water leaks create temperature differentials on the surfaces they contact. An infrared camera shows these as color-coded heat maps, revealing the wet zone inside a wall or under a floor without any cutting. A cold water leak behind drywall appears as a spreading cool zone; a hot water leak shows the inverse.

📉

Pressure Decay Testing

We isolate the supply system, pressurize to operating pressure, and monitor over a timed hold period. Any pressure drop confirms active water loss from the supply side. By isolating zones — hot side vs. cold side, section by section — we narrow down which branch is leaking before deploying detection equipment.

💨

Tracer Gas Detection

Tracer gas is the method of last resort for the most challenging cases. It adds setup time but finds leaks that acoustic and thermal methods alone can't conclusively locate.

What We Locate

Leak Detection for Walls, Slabs, Pools & Irrigation

Our detection service covers the full property, not just the obvious locations.

Under Slab

Under-Concrete Supply Line Failure Location

Supply lines running under or through the concrete slab fail from corrosion, shifting, or manufacturing defects — and the leak is invisible from the surface but audible to acoustic equipment. We walk the floor on a grid pattern, map the loudest detection points, and triangulate to a specific floor location, typically within a square foot. Confirmed slab leak location is documented with marked coordinates for the repair crew.

Professional Leak Detection technician working in Lexington, MN

In-Wall

In-Wall & Ceiling Leak Detection

We document the thermal anomaly, mark the approximate pipe location, and recommend a minimal access cut rather than a wide wall opening — typically saving hundreds in drywall repair costs.

Water Main

Main Line Leak Location in Lexington

Supply lines between the meter and the structure run underground and are vulnerable to corrosion, ground movement, and root damage. A main supply line leak shows as high meter usage with all interior fixtures off, sometimes with wet ground or sinkholes along the line path. Acoustic detection locates the failure in the buried line precisely enough to minimize excavation footprint — we mark the surface above the leak so the repair crew opens only the section they need to.

Pool & Irrigation

Pressure Testing for Pool Plumbing

Pool plumbing — suction and return lines buried between the equipment pad and the shell — develops leaks at fittings or in the pipe body that show as unexplained water loss. We pressure-test the pool plumbing circuit, isolate return and suction lines separately, and use acoustic detection to find which line and where.

24/7 Emergency Leak Detection experts in Lexington, MN

Insurance Docs

Leak Detection Report for Insurance Claims

We format detection reports specifically for insurance submission and provide documentation on our detection equipment and methodology to claims adjusters on request.

Commercial

Commercial Property Leak Detection in Lexington, MN

Commercial buildings have complex pipe networks where a supply or drain leak can go undetected through multiple floors before surfacing. We approach commercial detection systematically — zone-by-zone pressure isolation, thermal scan of suspect surfaces, and acoustic confirmation.

📞 Find My Leak — Call +1-844-833-0201

Our Process

Systematic Detection — No Speculative Cutting

Here's exactly how a Masters Plumbing Service leak detection call plays out in Lexington, MN.

Initial Water Loss Confirmation

We start at the meter. All fixtures off, we watch the meter for 10 minutes. Movement confirms active water loss from the supply side. We also check for visible evidence — stains, soft floors, moisture readings with a moisture meter at suspect wall surfaces.

Zone Isolation & Pressure Decay

Zone isolation turns "there's a leak somewhere in the house" into "the leak is on the hot side supply between the water heater and the master bath."

Detection Equipment Deployment

We document findings with thermal images and note detection readings at multiple grid points to triangulate the strongest signal.

Written Report & Repair Options

Insurance-formatted reports are available for claims submission at the same standard — no additional cost.

Customer Reviews

What Customers Say About Our Detection Service

★★★★★

High-efficiency home with a slow leak — about 1.5 gallons per hour. The tech used tracer gas after pressure testing confirmed the loss but acoustic detection couldn't localize it clearly. Gas detection found the escape at a micro-fitting under the slab in the utility corridor. Impressive work for a very difficult leak to find.

— C. Thornton, Lexington

Lexington, MN · Slab Leak Detection

★★★★★

Our insurance company required professional leak detection documentation before approving the claim. Masters Plumbing Service's written report with pressure test data and thermal imagery was exactly what the adjuster needed. Claim approved. The detection cost was covered as part of the claim.

— B. Osei, Lexington, MN

Lexington, MN · In-Wall Leak / Insurance Doc

★★★★★

Commercial building with elevated water costs for six months. Masters Plumbing Service ran zone-by-zone pressure isolation across four floors, narrowed the loss to the third-floor kitchen supply branch, and located the failure with thermal imaging at a concealed valve body in the ceiling. No damage to the finished ceiling.

— T. Anand, Lexington, MN

Lexington, MN · Pool Line / Commercial

FAQ

Leak Detection Questions from Lexington, MN Property Owners

If the meter test confirms water loss, call us before opening any walls. Our detection equipment locates the failure to within inches in most cases — which means a small, targeted access rather than speculative wall demolition.

The repair itself requires physical pipe access — typically a small targeted opening. But that's a completely different proposition from opening large wall sections while searching for an unknown leak location.

For pressurized supply lines in concrete or metal pipe, acoustic detection is typically accurate to within 6–18 inches under ideal conditions — quiet environment, no interference from other water use, metal pipe conducting sound efficiently. Thermal imaging is accurate to the size of the wet zone it reveals, which varies based on how long the leak has been running.

We provide supplemental information to claims adjusters on request, including equipment calibration records and a technical description of the detection methodology used.

A standard residential leak detection — confirming water loss, isolating the failing zone, and deploying detection equipment — typically takes 1.5–2.5 hours. More complex scenarios (multi-zone commercial, large properties, very slow leaks requiring tracer gas) can run 3–4 hours.

The repair quote is given before any wall or floor is opened. You know the full cost of detection plus repair before anything is cut.

Stop Guessing Where the Leak Is — Leak Detection in Lexington, MN